parameter:
Camera 1280*720P
Crying alarm support
Operating temperature 65℃ to -20℃
Display screen 3.5 inches
Shooting angle 60 degrees
Lullaby support
Transmission method: FHSS
Resolution 800*480 SENSOR 1/4COMS
Feeding time reminder support
Transmission distance 300M outdoor
Host power consumption 1.6W
Camera power consumption 1.5W
Night vision (automatic) Support camera net weight /
Battery 1500MA/H
Camera recording support
Temperature alarm supports display of net weight /
Main body size: length 133*width 76*thickness 20MM
Camera body size diameter 66*108MM
Camera button definition and pairing
Camera pairing Press the power button twice quickly to enter pairing mode, the blue light flashes
Open the menu to select Add Camera, press OK to enter the pairing mode, the blue light flashes, and the flashing stops when the pairing is successful.
Display terminal button definition
Long press the power button to turn on/off the device; short press to turn on/off the screen (you can hear the sound from the camera)
Press the intercom button to send voice to the camera
Menu key to open/return menu selection: volume, feeding reminder, lullaby, time setting, temperature unit switch, VOX, brightness
M key menu key/return key. Short press to display the menu, short press in the 3rd level menu to return to the 2nd level menu
Reset button restart function
Function: two-way intercom, infrared night vision, room temperature monitoring alarm 20℃-30℃, sound detection alarm
Purpose: When the caregiver needs to go to other rooms to do other things, he can bring the display terminal and monitor the temperature of the baby room at any time.
Observe the current situation of the baby, such as kicking off the quilt, etc. If the baby wakes up and cries at this time, you can turn on the intercom to give the baby verbal comfort to ensure uninterrupted family love; when the baby needs to rest, you can turn on the lullaby to help the baby fall asleep easily. When sleeping at night, you can turn on the VOX mode, the screen will go off for 30S, and when the sound in the baby's room is greater than the set value, the screen will light up.
4. Function Introduction
1. The sound and image of the baby are transmitted to the display end in real time. Adults can monitor the baby's condition in real time. When the intercom button on the display end is pressed, the baby can be sent language, etc.
2. Feeding reminder function: When set to 0:30H, 30 minutes later from the current time, the display terminal will have an image and sound alarm to remind the busy adult that the baby is time to feed, and so on.
3. The display terminal can select 8 lullabies to play for the baby terminal
4. Set the time according to different time zones
5. Set the display temperature according to your personal habits: ℃/℉
6. You can select the baby end to be displayed. If two baby ends are connected at the same time, you can switch the display automatically or manually.
7. VOX mode: The default setting is off. When the ambient sound of the baby is lower than the set value, the display screen will turn off after 30 seconds. When the ambient sound of the baby is higher than the set value, the display screen will light up. You can choose HIGH/MED/LOW according to the environment.
3 Operating Instructions
Pairing: When the CAM is turned on, quickly press the power button twice and the blue light flashes (about 10S), which means it is in pairing mode. At the same time, turn on the display end, press the M button to open the menu, find the upward direction to enter the pairing mode, and the red light flashes in the upper left corner of the display, indicating that CAM1 is successfully paired; the operation of CAM2 is the same as pressing the menu button to return to the main screen, and pressing the camera button to switch to the paired CAM. If there is no connection for 10S after entering the pairing mode, it will automatically exit the pairing mode.
(Note: One baby terminal can only be connected to one display terminal, and one display terminal can be connected to two baby terminals at the same time; the baby terminal cannot be too close to the adult display terminal to avoid howling)
4. Use distance
Outdoor space: 300M
Indoor: 30M Distance varies according to the material of the wall
5. Howling
The baby end keeps transmitting sound to the display end. In order to monitor whether the baby is crying, the sound of the environment will be amplified and sent to the display end. The display end will always hear this "noise" cycle, and the sound will become louder and louder. When the adult end gets close to the baby end, the sound emitted by the speaker will be received by the microphone of the baby end and amplified again. This sound will be sent to the adult end, thus forming a howling sound, speaking and listening as if you have never left.
Play crystal-clear audio with powerful embedded speakers, and hear what's important with the integrated noise-canceling microphone.
Music playback
Built-in 8 world famous songs to soothe baby's sleep, improve baby's hearing function, and promote baby's brain cell growth and development
Function: Manual rotation\two-way audio\infrared night vision automatic switching\temperature detection\8 lullabies\volume control\nursing reminder\crying reminder\5.0-inch LCD\HD display\voice\2.4G wireless transmission\sound activation\loop recording
Smart monitoring helps mothers protect every moment of their baby's growth
All videos that cannot be cracked are encrypted.
Stable connection, transmission range up to 100 meters
Real-time monitoring to help mothers
Monitor the baby's movement trajectory in real time to better protect the baby's growth
Feeding reminder
Develop regular eating habits for your baby to help them grow healthily
Temperature alarm
Monitor the room temperature throughout the day.
When it reaches 20 degrees, the built-in alarm will remind you.
Sound wake-up
Pay attention to your baby's real-time status at any time
